DATA & LIMITS
| Max Capacity | 350 m3/hr |
| Max Pressure | 13 Bar |
| Max Viscosity | 500 cPs |
| Max Temperature | 150 Degrees C (Higher upon request, special execution) |
| Max Suction Lift | 8 mm |
| Max Solids Passage | 10 mm - Impeller & Model specific |
| Impeller | Open / Star |
| Connections | 1.5" - 6" (DN40 - 150) |
| Connection Types | Couplings: DIN11851, DIN11864-1, SMS1145 Flanges: EN1092-1, DIN11864-2, ANSI Tri-Clamps: ISO2852, DIN32676, DIN11864-3 |
| Shaft Sealing | Single, double quench/flush, Inner and outer, EHEDG. according to DIN24960 |
| Sealing Materials | carbon/CrM, carbon/SiC, SiC/SiC, Tc/Tc |
| Elastomer Materials | EPDM, Viton, NBR, Teflon, KALREZ, e.g. according to FDA |
| Wetted Parts | AISI 316L (AISI 316L Mo Ni or Hastelloy C22 upon request) |
| Surface Roughness | ‹0.8 Micron (Std), ‹0.5 upon request |
| Drives | Standard: IEC, IE3, B3/B5, IP55, isol cl. F, PTC Optional: IE3, ATEX, noise reduction, Hydraulic, Pneumatic, Diesel Driven |
SANITARY SELF PRIMING CENTRIFUGAL PUMP
The CPC-ZA Series is the Self Priming variant of the CPC series. Due to its self priming capabilities, it makes it ideally suited for pumping liquids with entrained air and gases and where suction lift is required such as CIP return or Truck Unloading. Like the CPC Series consists of 5 set sizes, CPC 160-210-260-310-380 with a capacity range up to 300 m³/hr & 9Bar in 50 Hz and 350 m³/hr & 13 Bar in 60 Hz. All liquid contact parts are manufactured from cast Stainless Steel AISI 316L or AISI 316L Mo Ni with a surface roughness of ‹0.8 as standard (‹0.5 on request). CPC-ZA Sanitary Self Priming Centrifugal Pump is fitted with either open or star impellers, which are dry mounted to the shaft by means of O-Rings, are also fitted with pressure relief holes to ensure optimal cleaning of the shaft seal and chamber. The O-Rings ensure that there is minimal liquid contact with the shaft whilst cleaning the contact faces at the same time. There are minimal clearances between the impeller and the back casing to ensure high efficiencies and pressures whilst retaining its solids handling ability up to 30 mm. Units can be supplied close coupled in KAM, KAV & KAC designs with B3/B5 motors or with pneumatic, diesel driven or hydraulic motors in their IG & IGH forms. Various Mechanical Sealing & O-Ring options, as well as drain connections and heating jackets, are also available on request.
Food Industry:
Dairy: Milk, skimmed milk, butter milk, cheese milk, raw milk, cream, animal fats
Beverage: Fruit juices, soft drinks, beer, wine, spirits, liqueur, sugar solutions, syrups, water, concentrates, yeast
Food Stuffs: Animal and vegetable oils and fats, soups, sauces, spices, brine, water
Chocolates & Sweets: Milk products, oils and fats, sugar solutions, syrups, flavouring, liqueur, spirits
Sugar: Syrups, sugar solutions, invert sugar
CIP & SIP: Sodium hydroxide, nitric acid, hot and cold water, other specific cleaning liquids
