CTX I - industrial series

Materials, data and limits

Casing	Stainless steel AISI 316L glass blasted Ra<3.2
Impeller	Stainless steel AISI 316L glass blasted Ra<3.2
Mechanical seal	Single, SiC/carbon (std) or SiC/SiC, FDA approved Double, SiC/carbon (std) or SiC/SiC, FDA approved
O-rings	EPDM, FKM, NBR (all FDA approved)
Motor	IP55; IEC frame B35; PTC thermistor; IE3; 3-phase
Pressure rating @ 20^OC	PN10 – CTX 40-165, CTX 50-145, CTX 50-200, CTX 65-175 PN16 – CTX 65-230, CTX 65-240, CTX 80-205, CTX 80-212, CTX 80-260, CTX 100-230
Liquid temp.	-10 °C ... +120 °C (140 °C for short periods during SiP)
Ambient temp.	-20 °C ... +40 °C
Viscosity	max ~150 cSt

Built-on frequency inverter

This is easiest and most flexible way of changing pump working parameters.

In addition, the pump and motor are protected from overloading and a soft-start function is included.

Industrial flanged connections

The industrial CTX I pumps are equipped with connections according to EN 1092-1 type11, ANSI 150 or BSPT thread.

Adjustable feet

The solution allows easy cleaning of the surface undeneath the pump. It can also prove useful when there is a need to move the pump to a different location.

Mounting brackets

Complete pump unit may be assembled on a baseplate to avoid movement. It can be firmly, permanently fixed to the ground.

SPEAK TO US TODAY

+61 1800 303 633

Connection dimensions

Model	BSPT male thread		EN1092-1 flange (std.)		ANSI 150 flange
Model	Inlet	Outlet	Inlet	Outlet	Inlet	Outlet
CTX 40-165	1.5”	1.25”	DN40	DN32	1.5”	1.25”
CTX 50-145	2”	1.5”	DN50	DN40	2”	1.5”
CTX 50-200	2”	1.5”	DN50	DN40	2”	1.5”
CTX 65-175	2.5”	2”	DN65	DN50	2.5”	2”
CTX 65-230	2.5”	2”	DN65	DN50	2.5”	2”
CTX 65-240	2.5”	1.5”	DN65	DN40	2.5”	1.5”
CTX 80-205	3”	2”	DN80	DN50	3”	2”
CTX 80-212	3”	2.5”	DN80	DN65	3”	2.5”
CTX 80-260	3”	2.5”	DN80	DN65	3”	2.5”
CTX 100-230	4”	3”	DN100	DN80	4”	3”