CTX I - industrial series

Materials, data and limits

Casing Stainless steel AISI 316L glass blasted Ra<3.2
Impeller Stainless steel AISI 316L glass blasted Ra<3.2
Mechanical seal Single, SiC/carbon (std) or SiC/SiC, FDA approved
Double, SiC/carbon (std) or SiC/SiC, FDA approved
O-rings EPDM, FKM, NBR (all FDA approved)
Motor IP55; IEC frame B35; PTC thermistor; IE3; 3-phase
Pressure rating @ 20 °C PN10 – CTX 40-165, CTX 50-145, CTX 50-200,
CTX 65-175
PN16 – CTX 65-230, CTX 65-240, CTX 80-205,
CTX 80-212 CTX 80-260, CTX 100-230
Liquid temp. -10 °C ... +120 °C (140 °C for short periods during SiP)
Ambient temp. -20 °C ... +40 °C
Viscosity max ~150 cSt
 

Built-on frequency inverter

This is easiest and most flexible way of changing pump working parameters.

In addition, the pump and motor are protected from overloading and a soft-start function is included.

Industrial flanged connections

The industrial CTX I pumps are equipped with connections according to EN 1092-1 type11, ANSI 150 or BSPT thread.

 

Adjustable feet

The solution allows easy cleaning of the surface undeneath the pump. It can also prove useful when there is a need to move the pump to a different location.

Mounting brackets

Complete pump unit may be assembled on a baseplate to avoid movement. It can be firmly, permanently fixed to the ground.

 

Connection dimensions

Model BSPT male thread EN1092-1 flange (std.) ANSI 150 flange
Inlet Outlet Inlet Outlet Inlet Outlet
CTX 40-165 1.5” 1.25” DN40 DN32 1.5” 1.25”
CTX 50-145 2” 1.5” DN50 DN40 2” 1.5”
CTX 50-200 2” 1.5” DN50 DN40 2” 1.5”
CTX 65-175 2.5” 2” DN65 DN50 2.5” 2”
CTX 65-230 2.5” 2” DN65 DN50 2.5” 2”
CTX 65-240 2.5” 1.5” DN65 DN40 2.5” 1.5”
CTX 80-205 3” 2” DN80 DN50 3” 2”
CTX 80-212 3” 2.5” DN80 DN65 3” 2.5”
CTX 80-260 3” 2.5” DN80 DN65 3” 2.5”
CTX 100-230 4” 3” DN100 DN80 4” 3”